- Laman
- >
- produk
- >
- Pemancar VCI
- >
Pemancar VCI
1. Penyebar dan Pemancar VVCI adalah sejenis cangkang plastik berliang dengan ejen VCI terbina dalam dan sokongan pelekat, yang sesuai untuk antirust logam dalam ruang tertutup, terutamanya dalam persekitaran yang bersih.
2. VCI diffuser dan Emitter protect metal type ialah logam ferus, kuprum dan aloinya, aluminium dan aloinya. Sesuai untuk pencegahan karat dalam kabinet elektrik;
3. Penyebar dan Pemancar VCI sesuai untuk pencegahan karat pada permukaan logam yang sukar dicapai seperti lubang dalam, paip nipis, liku dan retak.
- CVCI
- China
- 14 hari selepas pembayaran
- 1500 tan sebulan
- maklumat
Product description of Vci Emitter Box:
VCI diffuser and Emitter is a kind of porous plastic shell with built-in VCI agent and adhesive backing, which is suitable for metal antirust in enclosed space, especially in clean environment. Vci Emitter Box can protect metal types are ferrous metal, copper and its alloys, aluminum and its alloys. Suitable for rust prevention in electrical cabinet; Vci Emitter Box is suitable for rust prevention of hard to reach metal surfaces such as deep holes, thin pipes, twists and cracks.
Recommended use of Volatile Corrosion Inhibitor emitter:
1. Storage and packaging of electrical equipment or electrical circuit and junction box.
2. Telecommunication equipment, remote electronic equipment, tool box.
3. Fuse box and power box.
4. Scientific measuring instruments.
5. Rust protection of metal parts during turnover or storage.
6. Space usage of Volatile Corrosion Inhibitor emitter: 100g/m³
Usage method of Volatile Corrosion Inhibitor emitter:
1. Vci Emitter Box can be installed in the flat elevation or plane of the equipment. Before installation, it is necessary to ensure that the bottom contact material is dry and clean.
2. During installation of Anti Rust VCI Emitter, please tear off the protective adhesive tape on the back, stick the foam adhesive on the back to the predetermined position, and press it firmly.
3. Try to install VCI Emitter in the sealed space in advance to play a good role in rust prevention.
4. Each Volatile Corrosion Inhibitor emitter can protect the effective space of less than 100 liters, and the space of more than 100 liters, so the number of diffuser should be increased proportionally, and the diffuser should be evenly distributed in the box to achieve the best antirust effect.
5. If VCI Emitter is opened frequently, it should be replaced every 3-6 months.
Protection type of Vci Emitter Box:
Anti Rust VCI Emitter Suits for protection of multiple metals.
Matters needing attention of Vci Emitter Box:
1. The surface of the protected workpiece should be clean and dry.
2. When using Anti Rust VCI Emitter, pay attention to the sufficient amount.
3. Desiccant can be used together when sealing packaging.
4. Pay attention to the adaptability with paint and rubber parts.
5. Clean and covered transportation tools shall be used for transportation. Anti Rust VCI Emitter shall be protected from rain, snow and direct sunlight. Handle with care to avoid damage to the protective packaging layer.
6. The original protective packaging layer shall not be damaged during storage and shall be kept sealed. Store in a cool, dry and clean warehouse. Avoid direct placement on the ground or direct sunlight. VCI diffuser and Emitter shall not be stored together with chemicals, and shall be no less than 1 m from the heat source and no less than 0.1 m from the ground.
7. Vci Emitter Box should be used at any time. If it cannot be used at one time, it should be sealed and stored again.
8. Vci Emitter Box is only for industrial use and should be kept away from children.
Storage of Anti Rust VCI Emitter:
Valid for one year; Anti Rust VCI Emitter shall be stored in a cool and ventilated place and stored as chemicals.
